Amphenol FCI Clincher Connector (2 Position, Male)
SAR 45
SparkFun GPS Dead Reckoning Breakout - NEO-M8U (Qwiic) - Supports NMEA, UBX, and RTCM protocols Over UART or I2C interfaces Time-to-First fix Cold Start (~26s) Hot Start (~1.5s)
SAR 376
SparkFun Thing Plus - SAMD51 Development Board Powerful microcontroller with Qwiic Connect System and Integrated Regulated LiPo Charger No Soldering Required
SAR 133
SparkFun Qwiic dToF Imager - TMF8820-5000mm Detection Range - Direct time-of-Flight Sensor - Single Modular Package with an associated VCSEL - Based on Single Photon Avalanche Photodiode
SAR 76
SparkFun Pro Micro - RP2350 Dual-core microcontroller - Development Platform - Compact Pro Micro Form Factor - Board Dimensions: 1.3in x 0.7in
SAR 89
SparkFun Buck Regulator Breakout - 1.8V (AP3429A) Input Voltage Range of 2.7V to 5.5V 1MHz Switching Frequency, VIN: 2.7V to 5.5V, VOUT: 0.6V to VIN
SAR 47
SparkFun Qwiic Alphanumeric Display Pink - 14-Segment Alphanumeric Display No Soldering Required 128 Patterns Maximum Display Segment Numbers 2X Wall mounting Points
SAR 60
SparkFun Compatible with Qwiic Micro:bit Breakout (Without Headers)- Expands The Capabilities Compatible with Micro:bit-Fits Edge Connector-Broken Out 21 GPIO pins-2x Qwiic Connectors
SAR 50
SparkFun Mini Human Presence and Motion Sensor - STHS34PF80 (Qwiic) Infrared Motion and Presence Detection Sensor, Operating Power Range: 1.7 to 3.6V, Board Dimensions: 1.0in. x 0.5in.
SAR 94
Tsunami Super WAV Trigger (Qwiic)-Supports up to 4096 uncompressed 16-bit-44.1kHz mono/stereo WAV files-CD quality-Polyphonic-Play & mix 32 mono/18 stereo tracks alone & simultaneously & much more
SAR 501
SparkFun MicroMod ESP32 Processor - Modular Interface Ecosystem That Connects ESP32 microcontroller/Processor Board to Various/Carrier Board peripherals
SAR 105
SparkFun GPS-RTK Dead Reckoning pHAT for Raspberry Pi, 3D IMU Sensor, Wheel Ticks, a Vehicle Dynamics Model, Correction Data, and GNSS Measurements. Dimensions: (2.56" x 2.22")
SAR 1,444
SparkFun Auto pHAT Compatible with Raspberry Pi Google Coral NVIDIA Jetson and More All in One Robotics Package Quickly add functionality to Single-Board Computers Drive 2 Small DC Motors & 4 servos
SAR 201
SparkFun GNSS L1/L5 Breakout - NEO-F10N, SMA - GPS - Galileo - Beidou - 3.3V Logic - Power 5V-3V - Board Dimensions 50.8 mm x 38.1 mm
SAR 219
SparkFun GNSS-RTK L1/L5 Breakout - NEO-F9P (Qwiic) High-Precision GNSS Board, with a Powerful 184-channel u-blox F9 Engine, Supply Voltage: 5V or 3.3V, Dimensions: 1.70" x 1.70"
SAR 1,252
SparkFun Raspberry Pi Zero W Camera Kit - Includes All The Pieces You Need to Assemble and Program IoT Raspberry Pi Zero Camera
SAR 417
SparkFun ProDriver - Stepper Motor Driver (TC78H670FTG) - No Soldering Required Power Supply Operating Voltage: 3.6 V to 16.0 V Allows Full Half Quarter and More Step Operation
SAR 120
Motor Driver - Dual TB6612FNG v2
SAR 99
SparkFun CO2 Humidity and Temperature Sensor - SCD41 (Qwiic) photoacoustic Measurement System Combines Narrow-Band IR Light and a Microphone, Board Dimensions: (inches) 1.00 x 1.00
SAR 391
SparkFun MicroMod Qwiic Carrier Board - Double - Rapidly Prototype Qwiic Devices Using a Variety of Processors from The MicroMod System Features Two Ports for Standard 1 in by 1 inch Qwiic breakouts
SAR 73
SparkFun Micro 6DoF IMU - ISM330DHCX (Qwiic) - Machine Learning Core -Qwiic Connectors - High Performance 3D Digital Accelerometer -Embedded Pedometer - Gyroscope - Supply Voltage 1.71V to 3.6V
SAR 146
SparkFun MicroMod SAMD51 Processor - Modular Interface Ecosystem That Connects SAMD51 microcontroller/Processor Board to Various/Carrier Board peripherals
SAR 107
SparkFun Thing Plus-Artemis Machine Learning Development Board Includes BLE 1MB of Flash USB-C Qwiic I2C MEMS LiPo Charger Compatible with Arduino IDE Platform Run TenserFlow Models Feather Footprint
SAR 136
SparkFun Serial Basic Breakout - CH340C and USB-C Development Tool Save Space and Money in Your DIY Electronics Projects
SAR 55
SparkFun Compatible with LoRa Thing Plus - expLoRaBLE-NM180100 System in Package(SiP)-Ambiq Apollo3 microcontroller-Includes Semtech SX1262 LoRa transceiver-Supporting 868MHz & 915MHz Bands & BLE
SAR 287
SparkFun Digi XBee® Development Board, 3 Low-Power LTE-M/NB-IoT Includes Two USB-C connectors for Communication and firmware Updates I2C Capable sensors, peripherals, Dimensions: 1.8 by 2.5 (inches)
SAR 120
BlueSMiRF v2 - Headers, Wireless Serial UART Link, ESP32-PICO-MINI-02 Module with Built-in PCB Antenna, Input Voltage: 3.3V to 5V, Board Dimensions: 44.2mm x 15.22mm
SAR 78
SparkFun Electronics Panel Mount USB Micro-B Extension Cable - 6"
SAR 53
SparkFun Qwiic Compatible with Micro:bit Breakout (with Headers)- Expands The Capabilities Compatible with Micro:bit- Fits Edge Connector- Broken Out 21 GPIO pins to Mail headers- 2X Qwiic Connectors
SAR 52
SparkFun AST-CAN485 Development Board Allow out-of-the-box interfacing CAN or RS485 network Compatible with Arduino IDE Industrial device interfacing Small foot-print 7-12DCV input Onboard Power
SAR 324
SparkFun Micro Magnetometer - MMC5983MA (Qwiic) Micro Board -Dynamic Range and Accuracy -Fully Integrated 3-Axis Magnetic Sensor -Qwiic Connection Port -Voltage Supply- 2.8V to 3.6V
SAR 97
SparkFun GPS Breakout - NEO-M9N, U.FL (Qwiic) Breakout No Soldering Required Breadboardable Contains a Rechargeable Backup Battery Allowing a Warm-Start decreasing time-to-First-fix
SAR 370