- Shopping, made easy.
- /
- Get the app!
Amphenol FCI Clincher Connector (2 Position, Male)
SAR 43
SparkFun GPS Dead Reckoning Breakout - NEO-M8U (Qwiic) - Supports NMEA, UBX, and RTCM protocols Over UART or I2C interfaces Time-to-First fix Cold Start (~26s) Hot Start (~1.5s)
SAR 358
SparkFun Thing Plus - SAMD51 Development Board Powerful microcontroller with Qwiic Connect System and Integrated Regulated LiPo Charger No Soldering Required
SAR 127
SparkFun Qwiic Shield Compatible with Arduino Nano-connect the I2C bus (GND, 3.3V, SDA and SCL) to four Qwiic connectors (two horizontally and two vertically mounted)-daisy chaining-Soldering Required
SAR 40
SparkFun Qwiic dToF Imager - TMF8820-5000mm Detection Range - Direct time-of-Flight Sensor - Single Modular Package with an associated VCSEL - Based on Single Photon Avalanche Photodiode
SAR 73
SparkFun Pro Micro - RP2350 Dual-core microcontroller - Development Platform - Compact Pro Micro Form Factor - Board Dimensions: 1.3in x 0.7in
SAR 85
SparkFun Buck Regulator Breakout - 1.8V (AP3429A) Input Voltage Range of 2.7V to 5.5V 1MHz Switching Frequency, VIN: 2.7V to 5.5V, VOUT: 0.6V to VIN
SAR 85
SparkFun USB-C Breakout connector's VBUS, GND, CC1, CC2, D+, and D- pins Intro a 0.1" 1.5A of Power and up to 3A Dimensions: 22.1mm x 14mm x 4.9mm (0.87in x 0.55in x 0.19in) Weight: 1.35g
SAR 40
SparkFun VR IMU Breakout - BNO086 (Qwiic) Combination Triple-axis Accelerometer/gyro/Magnetometer, 32-bit M0+, Board Dimensions: 1.0in. x 1.2in. (25.4mm x 30.48mm)
SAR 174
SparkFun Qwiic Alphanumeric Display Pink - 14-Segment Alphanumeric Display No Soldering Required 128 Patterns Maximum Display Segment Numbers 2X Wall mounting Points
SAR 58
SparkFun OpenScale Simple-to-use Open Source Solution for Measuring Weight and Temperature Includes HX711 24-bit ADC for weigh Scales TMP102 FT231 with Mini USB, for USB to Serial Connection
SAR 201
SparkFun Level Shifter -8 Channel (TXS0108E) -Bi-Directional Level-Shifting Breakout Component -Open Drain, Push Pull Applications
SAR 35
SparkFun Qwiic Speaker Kit, Speaker Amp, RedBoard Artemis Nano, Flexible qwiic Cable, Premium Jumper Wires (6in) 2pk, Reversible USB-A to USB-C Cable
SAR 350
SparkFun Compatible with Qwiic Micro:bit Breakout (Without Headers)- Expands The Capabilities Compatible with Micro:bit-Fits Edge Connector-Broken Out 21 GPIO pins-2x Qwiic Connectors
SAR 48
SparkFun Mini Human Presence and Motion Sensor - STHS34PF80 (Qwiic) Infrared Motion and Presence Detection Sensor, Operating Power Range: 1.7 to 3.6V, Board Dimensions: 1.0in. x 0.5in.
SAR 90
Tsunami Super WAV Trigger (Qwiic)-Supports up to 4096 uncompressed 16-bit-44.1kHz mono/stereo WAV files-CD quality-Polyphonic-Play & mix 32 mono/18 stereo tracks alone & simultaneously & much more
SAR 478
SparkFun MicroMod ESP32 Processor - Modular Interface Ecosystem That Connects ESP32 microcontroller/Processor Board to Various/Carrier Board peripherals
SAR 100
SparkFun GPS-RTK Dead Reckoning pHAT for Raspberry Pi, 3D IMU Sensor, Wheel Ticks, a Vehicle Dynamics Model, Correction Data, and GNSS Measurements. Dimensions: (2.56" x 2.22")
SAR 1,377
SparkFun Micro OLED Breakout (with Headers) Screen Size: 64x48 Pixels (0.66" Across) Monochrome Blue-on-Black, SPI or I2C Interface, Pre-soldered headers, Operating Voltage: 3.3V
SAR 65
SparkFun Auto pHAT Compatible with Raspberry Pi Google Coral NVIDIA Jetson and More All in One Robotics Package Quickly add functionality to Single-Board Computers Drive 2 Small DC Motors & 4 servos
SAR 192
SparkFun GNSS L1/L5 Breakout - NEO-F10N, SMA - GPS - Galileo - Beidou - 3.3V Logic - Power 5V-3V - Board Dimensions 50.8 mm x 38.1 mm
SAR 209
SparkFun GNSS-RTK L1/L5 Breakout - NEO-F9P (Qwiic) High-Precision GNSS Board, with a Powerful 184-channel u-blox F9 Engine, Supply Voltage: 5V or 3.3V, Dimensions: 1.70" x 1.70"
SAR 1,194
SparkFun LTE CAT M1/NB-IoT Shield - SARA-R4 -Add Data Network Compatible with Arduino or Compatible microcontrollers Wireless High-Bandwidth Cellular functionality Low Power Consumption R3 Footprint
SAR 900
Sparkfun Pocket AVR Programmer
SAR 135
SparkFun Raspberry Pi Zero W Camera Kit - Includes All The Pieces You Need to Assemble and Program IoT Raspberry Pi Zero Camera
SAR 398
SparkFun ProDriver - Stepper Motor Driver (TC78H670FTG) - No Soldering Required Power Supply Operating Voltage: 3.6 V to 16.0 V Allows Full Half Quarter and More Step Operation
SAR 115
Motor Driver - Dual TB6612FNG v2
SAR 95
SparkFun CO2 Humidity and Temperature Sensor - SCD41 (Qwiic) photoacoustic Measurement System Combines Narrow-Band IR Light and a Microphone, Board Dimensions: (inches) 1.00 x 1.00
SAR 373
SparkFun MicroMod Qwiic Carrier Board - Double - Rapidly Prototype Qwiic Devices Using a Variety of Processors from The MicroMod System Features Two Ports for Standard 1 in by 1 inch Qwiic breakouts
SAR 70
SparkFun Micro 6DoF IMU - ISM330DHCX (Qwiic) - Machine Learning Core -Qwiic Connectors - High Performance 3D Digital Accelerometer -Embedded Pedometer - Gyroscope - Supply Voltage 1.71V to 3.6V
SAR 139
SparkFun Pro RF - LoRa, 915MHz (SAMD21) - Wireless Board Easy-to-use IoT Qwiic Enabled microcontroller 915MHz ISM Band Reinforced Micro-B USB Connector Included u.FL Antenna Connector
SAR 184
SparkFun MicroMod SAMD51 Processor - Modular Interface Ecosystem That Connects SAMD51 microcontroller/Processor Board to Various/Carrier Board peripherals
SAR 102
