1. Support 6‑port 6.0Gbps III interface.
2. III PHY output swing control and automatic impedance calibration.
3. Support asynchronous signal recovery.
4. Support spread spectrum clock.
5. Support part/dormancy power saving mode.
Specification:
Features:
1. Support 6-port 6.0Gbps III interface.
2. III PHY output swing control and automatic impedance calibration.
3. Support asynchronous signal recovery.
4. Support spread spectrum clock.
5. Support part/dormancy power saving mode.
6. Automatic speed up negotiation.
7. Support and Loopback mode.
8. Support staggered up(Optional).
9. Support hot swap.
10. Support asynchronous inform.
11. Support Drive.
12. Support SWIT based on orders and Fi.
Compliance:
1. Compliant with Serial ATA Port Multiplier Specifications.
2. Compliant with Serial ATA Port Selector Specifications.
3. Compliant with ATA PHY Series Electrical Specifications Revision 1.0
4. Compliant with Specifications ATA Series High Speed Serialization.
Specifications:
Product: SATA3.0 1 to 5 Expansion Card
Model: ADP6ST0-J05 ADP5ST0-J02
Product Master: JMICRON JMB575
Product Package: Kraft Box
Product Interface: 7PIN
System: For WINXP,
Size: Approx. 10.2*5.5*0.7 cm/4.02*2.17*0.28 in
Package List:
1 * SATA3.0 1 to 5 Expansion Card
1 * USB-DC Power Cable
1 * Connection Cable
1 * Screw Bag
Note:
1. This expansion card needs Motherboard or expansion card to support point( Interface Multiplier) Funtion to identify 5 hard disks, common Motherboard do not support such function. If not, only one hard disk can be identified.
2. Do plug in or DC2.5 power cable to charge expansion card.
3. Cable Connection: