الاجهزه الالكترونيات الامريكية قد تحتاج الى محمول فولت من ١١٠ الى ٢٢٠.قد تحتاج إلى محول كهرباء
مميزات خاصة
LP-E6 dummy battery power adaptor for Canon EOS R, R5, R5 C, R6 Mark II, R6, R7, 5D Mark IV/III/II, 5DS, 5DS R, 5D, 6D Mark II, 6D, 7D Mark II, 7D, 90D, 80D, 70D, 60D, 60Da, XC15, XC10 camera, BMPCC 6K and BMPCC 4K
D-tap to LP-E6 dummy battery, replacement for Canon LP-E6 LP-E6N LP-E6NH battery. Perfect for long-time video shooting and live stream. Cable length is 60cm/24inches, orange braided sheet wire for durable use
Connect D-TAP with V-lock or gold-mount battery 12-17V. Regulate power output 8.4V 3A to the camera. No harm to camera
The D-TAP connector can rotate 180 degrees and adjust the angle. It is equipped with an LED indicator light.
Fully decoded battery, with Overvoltage, overheating, overcharging and short circuit protection. Shows remaining battery power. Dummy battery must be connected to power supply first, then put it into the camera, and close the camera battery door
وصف
Manual: 1. Connect the item with the power source.
2. Install the dummy battery into the camera and close the battery door.
(Note: this step must be the last, otherwise some cameras will not turn on).
If the installation sequence is reversed and the camera does not turn on, just take the fake battery out of the camera compartment and reinstall it to turn it on.