1. Alloy drill bits do not corrode easily, but since the drill bit is too thin and breaks easily, please be careful when using it.
2. Straight shank twist drills can achieve greater drilling performance with the same torsion.
3. Circuit board mounted drill bits, suitable for most working environments, convenient and practical.
4. Made of high quality tungsten carbide, firm and wear-resistant, stable and to use.
5. There are 10 pieces of drill bits available for use in different sizes to meet your different needs and suitable for professional use.

Specification:
Condition: Brand New
Item Type: Pressure PCB Drill Bit
Model: Twist drill with straight shank
Material: carbide
Application: Drill is applied to the circuit board
Cutting Diameter: Approx. 0.2mm/0.01in
Shaft Diameter: Approx. 3.175mm/0.13in
Chip Pocket Length: Approx. 5mm / 0.2 inch
Usable Length: Approx. 5mm / 0.2 inch
Total Length: Approx. 38mm / 1.5 inch
Outer edge angle: 45°
Maximum Cutting Depth: Approx. 5mm / 0.2 inch
Size: Approx.
2.1mm / 0.083 inch
2.2mm / 0.087 inch
2.3mm / 0.090 inch
2.4mm / 0.094 inch
2.5mm / 0.098 inch
2.6mm / 0.102 inch
2.7mm / 0.106 inch
2.8mm / 0.110 inch
2.9mm / 0.114 inch
3mm / 0.118 inch

Package list:
10 x Drill Bits

A notice:
1. Please allow errors due to manual measurement. Thank you for your understanding.
2. Since monitors are not calibrated same, item color displayed in photos may vary slightly from the actual item. Please take the original as standard.