Need to hang a pegboard? But do not want holes in your wall? Introducing Just Hanging Pegboards new Command Strip Wall Mounting Hardware! Custom designed to work with your pegboard, this hardware will help you get organized without needing to drill into your walls! This product includes 4 Mounts. Each mount has brass metal threads for more secure holding power. These threads are compatible with the original IKEA SKADIS screws. Each mount arrives with two Large command strips, and each set of four can hold up to 16lbs vertical load! A pushing 'bump' is fabricated into the mounting hardware for a more even weight distribution during install to ensure a solid grip. Screws not included Installation Instructions: 1. Clean the surface where your pegboard will be mounted and let dry. Remove all debris and dust. 2. Install the hardware onto the pegboard using the original SKADIS hardware. We recommend installing the screws at each of the four corners, and angling the hardware towards the center of the pegboard, keeping the command strips vertical. 3. Ensure screws are tight, then remove the 4 adhesive protectors from the command strips. 4. Press the pegboard onto the wall at the desired location. 5. Push on each of the four corners for 1 minute.