Suitable for most face-milling applications.
Reduces vibration on long overhang applications.
Chip thinning effect allows for increased table feeds.
High Positive cutting geometry.
Benefit from the 45-degree lead angle allows an increase of feed rate by 50% over the 90-degree face mill and also allows this face mill to be used on smaller horsepower mills. It uses an industry-standard SEHT / SEHW / SEHX 43 (ISO 1204) insert which has a positive 20-degree clearance angle. The insert pockets are designed to be 19 degrees positively inclined to minimize vibration and each pocket has a chip escaping pathway to help prevent chip built-up on the insert edge.
Each insert pocket is designed to reduce run-out and extend insert life.
Easy reference guide for insert number, screw, and other accessories is printed on the tool shank.
Use SEKT / SEHT / SEHW 43 1204 insert (INSERT NOT INCLUDED)