Tool Steel Body Precision Fly Cutting Tools in 3" Inches II 75 mm Head Diameter.
Supplied with a detachable 2MT shank (M10 x 1.5 mm Drawbar) which is pricisely ground. Supplied with a replaceable carbide insert indexable tool holder flying tool for metal face off.
Fly Cutters are a type of Face Mill that only uses 1 cutting edge of the cutting bit. There are 2 strong reasons fly cutters are used: They produce a very fine surface finish–better than most Face Mills.They're inexpensive relative to Face Mills.
Can be used to face off the metal on the lathe and the milling machine.
Can be used to face off the metal on the lathe and the milling machine.
Supplied with a replaceable carbide insert indexable tool holder flying tool for metal face off.
AD INTERNATIONAL HSS M2 Blade 1/8" (Thickness) x 3/4" (Wide) x 4" Inch (Long) for Lathe Parting Cut Off Tool
SAR 90
Boring Head 2" for Milling & Lathe Machine 1 Div: 0.0005" & 5 Pcs HSS Boring Bars ((MT3 Shank (M12 x 1.75 Drawbar))
SAR 339
MT1 Shank Mini Live Revolving Center Centre Triple Bearing-Lathe
SAR 100
Indexable Tool Bit 1/2" Shank for Fly Cutter for Milling II Replaceable TNMG16 Carbide Insert II Metalworking, Facing, Turning Tool
SAR 197
