Bearings
Installation introduction:
1. Disassembling bearings requires experienced personnel or under their guidance.
2. Before disassembly, determine the specific method of disassembly.
3. Prepare the necessary bearing unloading tools at hand.
4. When re-using or checking the disassembled bearing, pay attention to avoid scratching or damaging the bearing raceway or rolling element.
When removing the bearing from the housing, the removal force should be applied to the outer ring.
When removing the bearing from the shaft, the removal force should be applied to the inner ring.
The main method of disassembling bearings.
Use hand or hydraulic, use a special wrench, use a puller, use induction heating equipment (inner ring), use oil injection method
Be sure to check the disassembly for cracks, sharp edges, breaks, splinters or deformations.
==========
Hign-concerned Chemical : None
Material : Bearing Steel
Model Number : 30211 30212 30213 30214 30215 30216 30217 30218 30219 30220 30221