Features:
Made of material, practical to use
Large chip removal slot, smooth chip removal, low resistance long service life
side cutter, good centering, accurate drilling, not easy to deflect
Hex shank design, suitable for most machines, strong operability
Positioning for Ring design to control the height you want to select

Instructions:
: adjust the drill height,
2: Clip the board to be hit,
3: Put the drill into the hole touch the wooden board.
4: Raise the drill bit again 5 mm(remember not to start the electric drill against the wood),
5: Start the electric drill to reach a speed of more than 500 rpm, the recommended speed is 1500 rpm
: start feeding slowly, wait for the front fine drill to go in half or fully, then the feed can be accelerated

Specifications:
Name: Woodworking Inclined Hole Locator
Material: High Speed Steel( plating)
Category: Reaming Drill
Shank Size: 9.5mm/9.0mm(optional)
Total Length: 175mm
Application: Woodworking hole positioning

Package Contents:
* Drill Bit
* Stop for Ring
* Small Hexagon Wrench

Note:
. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.