The Constant Temperature Oil Water Bath is designed for precision and efficiency in scientific research experiments and school teaching. It features a lift type model with options for 2L, 3L, or 5L capacity, powered by 1.2KW, 1.5KW, or 2KW respectively. The temperature control range spans from room temperature up to 250℃, with an accuracy of ±1℃, utilizing PID intelligent temperature control for optimal performance. The temperature uniformity is maintained at 80%, with inner tank diameters of 240*140mm, 260*150mm, or 280*170mm depending on the model.

Usage Instructions:
1. Place the electronic constant temperature oil water bath on a stable platform. Attach the hose to the drain outlet and fill the bath with clean water (hot water can be used to reduce heating time).
2. Power on the device; the OFF indicator light will illuminate. Adjust the temperature knob to your desired setting to begin heating, indicated by the ON light. Once the set temperature is reached, the light turns off, signaling constant temperature maintenance.
3. Place your materials container into the bath for heating. For enhanced temperature consistency, seal the contact area between the container and the bath with cardboard, ensuring the materials level is below the water .
4. After use, remove the container, power off the device, and drain the water. Keep a record of the instrument's usage for maintenance purposes.

Package Includes:
- Host unit: 1