SPECIFICATION:
Material: Chrome plated brass body + Edible-grade stainless steel probe
Diameter of Straight Barb = Diameter of 90° Elbow Barb = 8mm : Accommodate I.D 5/16'' beer lines.
Quick Joint : Connect with 9.5mm(3/8'') tubing hose & Strong alibity to working with highpressure up to 200psi
Safety Protective: The pressure will be automatically released when the pressure reaches 55psi.
Gas check valve at the gas port side which could avoid liquid backflow and air entering.
Easy installation & Operation An ergonomic handle makes it easy to hold on when installation and operation which allows beer flow to the beer line immediately
Product Usage: Perfect for dispensing beer, soda, and other carbonated drinks. It can withstand heavy uses in commercial environments like pubs, bars, and restaurants.
How to Use a keg coupler in correct method ?
Line up the coupler together with the keg's valve and push it down firmly, ensuring that it locks in place. Turn the coupler handle clockwise until it's fully tightened, making use of the wrench if necessary. This can pierce the keg's seal and let the beer to circulate. Next, open the CO2 regulator and dispensing the beer.
Warm Tips:
The length of the beer tube is at least 1.2-1.5 meters would be better which the foam will be less.
==========
Hign-concerned Chemical : None
Product Type : Carbonation Equipment
Material : STAINLESS STEEL