Search

Search

Home / GENVQdf / Cutting Tools
T Slot End Mill, Radius Corner T-Slot Milling Carbide T Type End Mill Concave Arc Machining D3-D20 in Saudi Arabia T Slot End Mill, Radius Corner T-Slot Milling Carbide T Type End Mill Concave Arc Machining D3-D20 in Saudi Arabia T Slot End Mill, Radius Corner T-Slot Milling Carbide T Type End Mill Concave Arc Machining D3-D20 in Saudi Arabia T Slot End Mill, Radius Corner T-Slot Milling Carbide T Type End Mill Concave Arc Machining D3-D20 in Saudi Arabia T Slot End Mill, Radius Corner T-Slot Milling Carbide T Type End Mill Concave Arc Machining D3-D20 in Saudi Arabia

D12xR2x4Hx60L

SAR 191
Brand
GENVQdf
Category
Cutting Tools
Weight
50 g
SizeD12xR2x4Hx60L
– 1 +

Special Features

  • Features - Sharp cutting edge provides smooth cutting, not easy to break. coating provides excellent , greatly improves wear resistance and hardness, and reduces the coefficient of friction.
  • Material - The T-slot milling has has high hardness , good toughness, wear resistance, bending resistance and heat resistance. With good milling and cutting performance, carbide can run at higher speed than other substrates.
  • Notes - Used on machining centers, drilling and milling machines, engraving machines. Properly reduce the cutting speed and feed can prolong the life of the milling . Add cutting to protect the cutting edge and make the cutting smoother when working.
  • Applications - Suitable for machining T slotting, straight slotting, side grooving and half-round keyway on the work piece. Widely used for milling and cutting stainless steel, cast iron, tool steel, alloy steel, copper, aluminum, composite materials, etc.
  • Used on machining centers, drilling and milling machines, engraving machines. Properly reduce the cutting speed and feed can prolong the life of the milling cutter. Add cutting fluid to protect the cutting edge and make the cutting smoother when working.

Description

Specifications: R0.5,R0.75,R1,R1.5,R2,R2.5,R3,R4.R5
Hardness: HRC60
Suitable for: machining centers, milling machines, engraving machines, Precision engraving machines, etc.
Material: carbon steel, cast iron, mold, aluminum, copper, steel within HRC60 and stainless steel, etc.
The coating is suitable for processing steel parts.
No coating is suitable for processing copper and aluminum.
Feature:
1. tungsten steel material
2. Wear-resistant not easy to stick to the milling
3. High chip removal efficiency
4. Fast processing speed and high finish
5. Strong continuous processing is not easy to break
6. The bottom has a chamfered design, easy to install

Related Items

{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}