New Electrical Harness This is a complete electrical harness “Plug and Play” to easily connect all the components of this kit and designed for a basic car or trucks applications. Lengths are set from the Relay: To the Under-dash evaporator (green wire) 5 ft.'s To Pressure switch (on the drier) and ground 24 inches To Compressor 6 ft.'s and Condenser fan 9 ft.'s Compressor SD 508 Sanden Type 2A Groove 12v can be change to a serpentine type compressor, just let us know Condenser Parallel Flow 14X20in (18mm Core Depth) 4 Rails Aluminum Evaporator Underdash Model CM-432-100 High quality case 30 pass 4 way all alumunim coil Expansion valve 1.5 Ton Thermostat and rotative 3 speed blower switch Mounting brackets and drain hose and T included 12,700 BTU capacity 359 CFM (real) do not get confused Hoses #6 5/16 = 6 FT #8 13/32 = 4 FT #10 1/2 = 5 FT W/Fitting and clamp filter Drier w/pressure switch 2.5 X 7.5 in 3/8MIO X 3/8MIO W/ 1/4 CP ROI Condenser fan 12″ Diameter 12 Volts 80W 6 AMP Reversable – 4 Mounting Brackets included *Not include mounting bracket for compressor* *Not include gas R134a*