Jade Emerald is a clear, nano crystalline offering protection for your vehicle from weather, chemicals, and UV rays while repelling water, dirt and other contaminants. Jade Emerald is an ultra hard (9H) coating, offering superior durability and longevity. The final coat is 2-3 microns thick, helping to enhance the protection you car deserves. Directions for use: NOTE: Southwest Autocare does not assume for warranty, error, product quality, or effectiveness regarding the Jade ceramic coating products. This instruction sheet is solely for RECOMMENDATION ONLY and is not to be used in lieu of a professional detailer. Make sure car or other surface is in a cool setting, out of direct sunlight. Also ensure no dust or dirt can be blown onto surface. Instructions: A)Wash with soap and water the surface you are applying to. B)Dry and return with a clay bar (if needed) to decontaminate the surface. Use Body Gloss #391 or similar clay bar lubricant. C)Wipe down surface to be coated with an alcohol cleaner or similar surface stripping chemical. Paint should be ‘skippy' to touch skin to, not smooth but dragging on hands. D)Apply 3 dots of ceramic coating to blue applicator pad. E)Work in a 24x24” or smaller area, applying ceramic coating in a hatch pattern, left to right, right to left, until to the bottom diagonally opposite corner you started from. a.Proceed to start in an up to down, down to up, pattern starting from the same spot you began in. F)Product will flash a shade of color soon after applying. Return with clean microfiber towel and wipe the area down. Let the surface cure for 12-24 hours, depending on your climate. Do not take car through automatic car washes, or touch car washes.