ECCPP 2" inch 6 Lug Hubcentric Wheel Spacers 6x135mm to 6x135mm fits for Ford Expedition for Ford for F-150 for Lincoln Navigator for Lincoln Mark LT-2PCS
Compatibility List Included : The 6x135 Wheel Spacers 2 INCH fit for 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 for Expedition 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 for 150 2006 2007 2008 2009 2010 2011 2012 2013 2014 for Mark LT Wheel Spacers 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 for Navigator 2004 for F150 Heritage Wheel Spacers
Installation with Confidence : Wheel Spacers 6x135 with Thickenss:2" or 50mm;Inner Diameter:87mm;Outer Diameter(6.693 inch).Vehicle Bolt Pattern:6x135mm;Wheel Bolt Pattern:6x135mm;Thread Pinch:14x2.0; (Vibration can be avoided by simply following the recommended torque for installation, keeping the wheel adapters & spacers tight against the hub and Clean the rust of wheel and hub surfaces)
Superior Safety And Stability : 6x135 to 6x135 WHEEL Spacers HUB CENTRIC Hubcentric - support and center the wheel to better resist impact loads from different road conditions and eliminate the risk of vibration.CNC automatic processing technology is used to ensure high precision and stability. The 10.9 stud can reach a tensile strength of 1000MPa, providing better structural support and safety.strict quality control, improve vehicle handling and stability, and prevent roll
Strict Quality Performance : The 6x135 HUB CENTRIC WHEEL SPACERS are made of high-quality forged 6061-T6 billet aluminum alloy and CNC precision machining, and the surface anodized coating can also protect the metal surface from environmental erosion under extreme conditions.CNC automatic processing ensures high accuracy and stability. These forged 6061 t6 aircraft aluminum wheel spacers are stronger
Check before You Purchasing : 2 inch wheel spacers 6X135 Even if a vehicle is listed as being compatible, buyers still need to check: 1) Wheel studs are 14x2mm threads; 2) You have more than 2 inch of space between your fender and your wheel/tire; 3) Your factory wheel studs are shorter than 2 inch (NOTE: If your wheel studs are too long, you may need to grind/trim the stud down to fit); 4) Wheel center bore needs to be no smaller than 87mm