Scissor Jack 2 Ton with Crank Handle, 4,409 Lbs Capacity Steel Car Jack Portable Car Lift Tire Changing Kit Handheld Jack Tool, Car Emergency Kit, Used for /SUV/MPV Tire Repair and Replacement Tool

Feature:
- Made of high-quality steel, strong bearing gravity, and resistance to pressure.
- The scissor jack can bear a weight of 2 tons.
- The lifting height can be from 105mm to 385mm(4.13 inches to 15.16 inches).
- Compact and portable design, more convenient to use and store.
- Easy to operate using the chromed crank handle.
- Suitable for small and medium-sized vehicles. Such as cars, Buick, Santana, Hatchback, Saloon, Caravans, Vans, and other vehicles.

Specifications:
Color: Black
Min Height: approx. 105mm (4.13")
Max Height: approx. 385mm (15.16")
Lifting: 2.0 Ton
Material: Steel
Net weight: 2.1KG

Size: 35x8.5x8.5CM (L×W×T)

Package included:
1 x 2 Ton Car Scissor Jack
1 x Crank Handle

OPERATING INSTRUCTIONS
1. Insert the scissor jack handle into the hole of the handle socket.
2. Make sure that the saddle is correctly positioned. To prevent damage to the scissor jack, do not move the scissor jack while the handle is intact in the socket.
3. To raise the load, use one hand to hold the front part of the handle and use the other hand to turn at the rear and of the handle clockwise.
4. To lower load, use one hand to hold the front part of the handle and use the other hand to turn at the rear and of the handle counterclockwise slowly.

CARE AND MAINTENANCE
1. When the scissor jack is not in use, the lifting arm should be in the full down position.
2. Always keep the scissor jack clean and keep the screw and bearings well lubricated.
3. Store the handle with care.