Specification:
Item Type: Electric Drill
Material: Plastic, Metal
Battery: 2 x 21V Lithium Battery (included)
Battery Capacity: 1200mAh
Power: 130W
Maximum Clamping Diameter: Approx. 10mm / 0.4in
No Load Speed: 0-650r/min-850r/min-1850r/min
Chuck Diameter: Approx. 10mm / 0.4in
Drilling Capacity: Wood: Approx. 140mm / 5.5in, Steel: Approx. 140mm / 5.5in
How to Use:
1. Install the drill bit
Insert the drill bit into the installation hole. Then slightly rotate it to locate the mating position.
At the mating position, push the drill bit in as far as possible. Pull on the drill bit to ensure it is secure.
2. Remove the drill bit
Press down on the chuck cover and pull the drill bit outwards.
3. When charging, the charging light will illuminate. Once charging is complete, the internal electronic switch will automatically trigger to prevent overcharging. If the battery is hot (e.g. immediately after overloading), charging will not occur. The orange standby light will come on until the battery cools down. Charging will then start automatically.
4. After charging is complete, the charging lig