Carburetor heat insulator gasket, for Edelbrock Performer intake mainfolds and carbs
Reduces fuel percolation, heat soak and warm start engine issue fixed
Constructed of nitrile rubber composite, stable performance in extreme high temperature environments in the engine
Dual plane with spilt center, matches used with divided runner intake, seals under the carb to the intake
Square bore mounting flange applications. Comes with extended carburetor studs

Item Specifics

Part Type: Carb Heat Insulator Gasket

Fitment Type: Direct Replacement

Material: Nitrile Rubber Composite

Number of Barrels: 4-Barrels

Gasket Opening Style: Divided Center, Split

Gasket Thickness: 5/16 Inches

Fits Carburetor Flange: Square Bore

Cross Reference: 9266

Applications:

For Edelbrock Performer Intake Mainfold

For Edelbrock Performer and Thunder Series Square Bore Carbs

All for Holley Style Carbs

Installation:

1. Check air cleaner to hood clearance, ensures that additional height of heat insulator gasket will not interference other components

2. Remove air cleaner and all attachments to the carburetor(fuel line, throttle linkage and vacuum lines)

3. Remove the carburetor, then remove the old base gasket and any additional plates

4. Remove the stock carburetor studs(short) and install the new studs(long)

5. Install the heat insulator gasket directly against the manifold, replace the carburetor and all other connections

مرحبًا،

بحث