Specification:
Condition: Brand new
Material: PVC
Color: As picture
Optional size:
61 x 30cm / 24.02 x 11.81 inch (Approx.)
61 x 41cm / 24.02 x 16.14 inch (Approx.)
76 x 30cm / 29.92 x 11.81 inch (Approx.)
76 x 46cm / 29.92 x 18.11 inch (Approx.)
91 x 41cm / 35.83 x 16.14 inch (Approx.)
91 x 50cm / 35.83 x 19.69 inch (Approx.)
122 x 46cm / 48.03 x 11.81 inch (Approx.)
122 x 50cm / 48.03 x 19.69 inch (Approx.)
122 x 61cm / 48.03 x 24.02 inch (Approx.)

Package Included:
1 X Sea-world poster

Adhesive Method:
1. Wipe clean the glass on the back of the fish , add a little detergent with water (in order to reduce the viscosity of the glue), and spray it on the glass surface.
No need to spray a lot, just a little bit wet, or wipe with a damp cloth
2. Tear off a corner of the background protective film, align the fixed position and start pasting, apply slowly and evenly when pasting, if it appears when pasting
Air bubbles, you can tear open to the bubble and spray some water to paste again. Scrape it down in sequence and don't miss it. The missing area is easy to foam.
The (4) will not appear if the bubbles are scraped clean.
3. After sticking it up, use a scraper or stroke to check if there are any leaked bubbles. If there are bubbles, you can use a needle to pierce the bubbles and use the scraper to squeeze them out.
4. After the paste is finished, the glue will turn white if the water is not wiped clean, open it and dry it with a hair dryer and continue to paste it and flatten it.

Notice:
Please allow 1-3cm error due to manual measurement and make sure you do not mind before ordering.
Please understand that colors may exist chromatic aberration as the different placement of pictures.