Specification:
Item Type: Radio Transceiver
Size: Approx. 83 x 38 x 124mm / 3.3 x 1.5 x 4.9in (excluding protruding parts)
Support All Modes: USB, LSB, CW, AM, FM (SSB mode has good reception effect, but poor effect. AM and FM modes are , and the effect is not good)
DSP Filter: 4000, 2500, 1700, 500, 200, 100, 50hz passband
DSP Functions: Automatic Gain Control (AGC), Noise Reduction (NR), Xmit Voice (VOX), RX Attenuator (ATT), TX Noise Gate, TX unit control, volume control, dbm/s meter.
Sidebar Carrier Suppression SSSSB Transmit: Better Than -45dbc, imd3 (dual Tone) -33dbc, Receive: Better than -50dbc
Support multi-band support, continuously adjustable 10m within 80m frequency range (from 20khz to 99mhz, loss performance)
Software Complexity: 2000 lines of software-based Vovox code can be used for fast full control (QSK and half QSK ) or RX auxiliary switch TX in digital mode (no cat or PTT interface required), using fully digital TX delay stage and based on The software SSB class transmitter externally controls the PTT/PA output, controlling the phase of the sill si5351 (by small frequency changes i2c at 800kbits/s) and the amplitude of the pa (by the pwm pa key shaping circuit)
Adaptable Battery Interface: 1.25mm Terminal
Specification: 11.1V(12.6V)/4000mAh
Size: 93*60*18mm/3.7*2.4*0.7in

Package List:
1 x Transceiver
1 x Microphone
4 x Machine Foot Pads

Note:
You can watch the video to operate