Conversion mount for your tattoo machine to use an RCA jack instead of a clip cord. The advantage of an RCA jack lies in its strong attachment head. Since the RCA jack inserts entirely into the female plug, there is almost no way for the clip cord to get knocked out of place. The only way one would remove the jack is by physically removing the plug when you want to or need to. RCA Mount with plug fitted above the back spring for easier attachment. Angled frame allows for multiple angles and positions for better attachment
This mount is easily installed by unscrewing the back spring screw to release the spring deck/back spring and the back binding post (post that the clip cord is inserted into, on the frame). Put the RCA mount frame with RCA plug facing towards the rear with the screw hole in between the spring deck and back spring, position the angle as you need and then tighten back the spring deck/RCA mount frame/back spring. Snake the connection wire beside the rear coil and down so the eyelet is connected to the rear binding screw threads. Put back on the back binding post and tighten the screw.