Specification:
Material: ABS
Battery: 500mAh 12.8V
Working Current: 1-5A
Charging Mode: USB
Charging Time: 2.5h
. Inflating Pressure: 150PSI & 10.3BAR & 990KPA & 10.5kgf/cm²
Temperature: -10-60
Size: Approx. 18 * 5 * 5cm / 7.1 * 2 * 2in
Weight: Approx. 180g
Inflation:
1. Connect one end of the air tube to the inflator, connect the other end to the tire valve. (For the french valve, please install the valve converter at first.)
2. Long press the POWER Button to turn on the power. The LCD will display the current pressure.
3. Pressing the UNIT button can switch the units.
4. The + Button and - Button are preset buttons for adjusting the target pressure. Long press them can adjust the target pressure quickly. (If skip Step4, the target pressure is the value you preseted last time.)
5. Pressing the POWER Button can start inflating. Pressing it again can pause/continue. It will stop automatically when it reaches the target pressure.
6. Please quickly remove the air tube from the tire to prevent air leaks.
7. The inflator will not work when the target pressure you set is lower than the current tire pressure.
Lighting:
Long press the unit button to turn on/off the LED light,andLED lightcanbe used forlighting.
Power Bank:
1. Long pressing the + Button in the off state can turn on/off the power bank.
2. Power bank will be turned off automatically after 60 mins of work.
3. If turn on the power, power bank will be turned off automatically.
Package List:
1*Inflator
1*USB Charging Cable
1*Balloon Needle
1*Valve Converter
1*Basketball Air Needle
1*Bicycle Bracket
2*Bracket Screws
2*Non-slip Pads
1*Hook-and-loop
1*Storage Bag