Specifications:
Product Name: Invisible Waterproof Agent
Net Weight: 300g
Application: Kitchen, Bathroom, Roof, Window Sill, Interior and Exterior Walls
Storage Method: Store in a cool place
Reference area: Overall brushing: 300g is about 2 square meters, if only the gap is brushed: 300g is about 3.3m

Package Includes:
1 * Invisible Waterproof Agent + Brush

Notes:
1. Clean the ground before construction to keep the ground free of dirty water stains. If the gap is too deep, plug the leak first and fill the gap. The product does not need to be mixed, just open the cover and brush it. Before construction, plug the floor drain to prevent glue leakage.
2. During construction, the colloid should be brushed as thinly as possible (film formation and drying are faster). It is recommended to brush twice (better effect) on key locations (toilet edge/floor drain/corner gap) and other parts. During construction, it should be brushed once to form a continuous and smooth waterproof film on the base surface.
3. It is recommended to ventilate the site after construction. The colloid should not be exposed to water or stepped on before it is dried and cured. The colloid will be dry after 2 hours at room temperature above 20℃, and it can form a film in 5 hours. The lower the temperature, the slower the curing (the low temperature in winter may affect the curing time). Due to the difference in brushing thickness and ambient temperature, the curing time will vary slightly, and the actual construction curing time shall prevail.