Note:
1. THIS SWITCH is for 3 signal hosts to be displayed on 1 Monitor ONLY.
2. This HDMI Switch supports up to 4K/30Hz, If your input device (such as PS4 Pro) run 4K/60Hz, it won't work,
please LOWER the resolution from 2160P-RGB to 2160P-YUV420, or to1080P.
3. This HDMI Switch can switch automatically (means turn off one input source, it will display other sources automatically),also can support by MANUALLY pressing the SELECT button or by Remote Control.
4. For the remote, please take the plastic strip out of the remote, then line up the sensor with remote control.
It works well with computers, laptops, Blue-ray players, PS3/PS4, 360/one, etc.
Using AWG26 HDMI 1.4 version of the standard cable, the input transmission distance can reach 15 meters, and the output transmission distance can reach 25 meters.
The input terminal can be remotely switched(battery not included) by infrared, or it can be directly controlled by pressing the"SELECTED" button.
Can automatically skip unconnected signal sources
Memory function, when restarting or reconnecting, it can be restored to the last connection state without signal loss.
Connection and operation:
Connect the input port of the switcher with the HDMI signal source through the HDMI cable.
Connect the output port of the switch to the HDMI display device through the HDMI cable.
Connect the 5V USB power cable supply to the 3 in 1 out HDMI switch selector.
Use infrared remote control to control the switch to freely switch the three signal sources
You can also use the RS-232 control system to switch the three signal sources freely.
Package Included: 1 pcs 3 in 1 Out HDMI Switch Selector;1 pcs remote control(Without battery); 1 pcs USB power cable（80cm).