Product Desciption
Note: The Product Does Not Contain Glue On The Back, You Need To Buy Glue Separately.
These Stainless D-Rings On Rugged Pvc Patches Can Be Glued To Inflatables Of All Kinds—Kayaks, Rafts, RIBs, and SUPs.
It Can Carry Your Gear For You. (Whether It's a Drink Cooler, Fishing Tackle, Snorkling Gear, Camping Equipment, Food Or An Extra Set Of Clothes.)
You Don't Have To Strap On a Backpack, And You Can Have Your Hands Free For Paddling, Swimming, etc.
You Are Able To Tighten Down The Bungee In a Matter Of Seconds.
D-Ring Installation Instructions
1. Inflate The Boat And You Can Clean The Area Where The D-Ring Needs To Be Installed, With a Mild Detergent, Making Sure To Dry The Area Completely After Cleaning.
2. Place The D-Ring Patch On This Area And Outline The Patch On The Boat, Tilting Inward a Little So That The Patch Later Covers The Trace Mark.
3. Apply a Thin Layer Of Glue To The Back Of The D-Ring Patch And The Boat With The Mark Mark, Making Sure That The Glue No Air Bubbles Is Evenly Distributed On Both Surfaces.
4. Let The Glue Stick For About 10 Minutes.
5. Put Some Approximately 5-7 Pounds Of Weight To The Patch, And Let It Dry For About 10-12 Hours.
Package Included:
D-ring patch ×6
Material:
PVC/ Stainless Steel
Note:
The Product Does Not Contain Glue On The Back, You Need To Buy Glue Separately.