بحث

بحث

بيت / HHIP / أدوات القطع
HHIP 6002-0222 TNMG/DM إدراج كربيد أشعل النار السلبي المثلث، 1/4 "IC، 0157" نصف القطر in Saudi Arabia

HHIP 6002-0222 TNMG/DM إدراج كربيد أشعل النار السلبي المثلث، 1/4 "IC، 0157" نصف القطر

SAR 23
ماركة
HHIP
– 1 +

مميزات خاصة

  • For steel medium machining
  • Cutting edge with special strength and toughness
  • Combination with MT-TiCN, thick layer Al2O3TiN coating
  • IC is 1/4"
  • ISO insert number is TNMG110308DM

وصف

HHIP TNMG/DM triangle negative rake carbide insert is a suitable grades for a wide application. It is good for the finishing, semi-finishing and light roughing of steel, cast steel and stainless steel. Features DM - Widely used chip breaker is used for semi-finishing and finishing of steel and stainless steel. XAB749: Cutting edge with special strength and toughness, in an optimal combination with MT-TiCN, thick layer Al2O3TiN coating. Product Specifications: ASA Insert No.: TNMG-222-DM; ISO Insert No.: TNMG110308DM; I.C. (Inch): 1/4; L: 7/16; S: 1/8; d: 0.09; r: .0157; Grade: XAB749.

منتجات شبيهه

{"error":"\u062e\u0637\u0623","cart_limit":"\u0644\u062f\u064a\u0643 \u0627\u0644\u0643\u062b\u064a\u0631 \u0645\u0646 \u0627\u0644\u0645\u0646\u062a\u062c\u0627\u062a \u0641\u064a \u0633\u0644\u0629 \u0627\u0644\u062a\u0633\u0648\u0642 \u0627\u0644\u062e\u0627\u0635\u0629 \u0628\u0643.","prod_limit":"\u0644\u0627 \u064a\u0645\u0643\u0646\u0643 \u0625\u0636\u0627\u0641\u0629 \u0627\u0644\u0645\u0632\u064a\u062f \u0645\u0646 \u0647\u0630\u0627 \u0627\u0644\u0645\u0646\u062a\u062c"}