Exclusively from Liquid Audio, this bundle includes the sE Electronics X1 R Ribbon Microphone Bundle w/ Pig Hog PHM10 8mm Mic Cable and Liquid Audio Polishing Cloth. Designed to enhance your recording experience, this complete set features a professional ribbon microphone and a durable mic cable. The X1 R mic provides exceptional clarity and versatility, making it an ideal choice for upgrading your recording setup. The second addition to the X1 Series, the X1 R brings the magic of traditional ribbon mics into the modern age with a tough construction that can handle any SPL. This is a ribbon you can take on the road. The sE Electronics X1 R is suited to a variety of recording applications, including guitar cabs, overhead drums, brass, woodwind, strings, commercial broadcast and voice-over. Features: ● State of the art ribbon element enclosed by top-grade Neodymium magnets ● Classic sounding ribbon mic with a gentle HF lift and high SPL handling ● Integrated HF (High Frequency) extension technology found in the VR1/VR2 ribbon microphones ● All-metal housing and gold plated XLR connector Specifications: ● Transducer: Hand-crafted 2.5 µm aluminum ribbon ● Electrical impedance: 200 Ohms ● Connectivity: 3-pin male XLR connector ● Powering: N/A (phantom-protected) ● Polar patterns: Figure-8 ● Frequency range: 20 Hz - 16 kHz ● Sensitivity: 1.8 mV / Pa (-55 dBV) ● Max SPL: 135 dB (0.5% THD @ 1kHz) ● Equivalent noise level: 23 dB ● Signal to noise ratio: 71 dB ● Electronics: Passive ● Mic weight: 510g / 17.99oz