All electronics ship with US style plugs.You may need a voltage converter or a plug adapter.
Special Features
[Products Feature]:the Silurian solar charger controller Thickness is only 1.8 cm, thinner, Easily mounted on the back of the solar panel (Ordinary solar panel Edge Height thickness greater than 2 cm). The product adopts silicone rubber plug, good rainproof effect (Note: the wiring port should be downward installing, otherwise the rainproof function will be lost).
[15A Solar Charge controller]: the Silurian solar charger controller compatibility with 12V 24V modes. Load Outputt: 10A, The Silurian charge regulator is suitable for lead-acid batteries, lithium batteries and lithium phosphate batteries. Each type of battery has its own protection voltage, higher than the protection volts or lower than the protection volts controller will automatically shut down.
[Multiple Protection Functions]: Silurian solar controller has over-temperature protection, over-charging protection and over-discharging protection.Fully 3-phases PWM charge management, elevation system efficiency and prolong the life span of the accumulators
[liquid crystal screen]: the Silurian solar charger controller Comes with a display that can indicate the condition and data, it can be conveniently switched modes and parameter configuration
[Easy to operate] First link the accumulators to the charge controller and set the accumulators type. Then link the solar panel and finally the load! The order of disassembly is reversed from the order of wiring.The product has a full aluminium case to intensify heat dissipation. (Note: The charge controller generates heat during operation. Please be careful to install the charge controller in a flat, ventilated area to dissipate heat).