SPECS: M12x1.50 thread - Closed End Bulge Acorn Style Lug Nuts - Conical 60 Degree Seat - 3/4 inch (19mm) hex - 1.38 inch (35mm) long - 22.1mm wide
FITS: Vehicles with wheel studs requiring a 12x1.5 thread and wheels that take a conical 60 degree seat.
VERIFY FITMENT: By matching this lug's specs (thread, seating style, hex, etc.) to match both your vehicle and wheel requirements. Or contact our Customer Experience Team to verify a safe and proper fitment.
INCLUDES: 20 PCS Chrome Closed End Bulge Acorn Lug Nuts.
The above shows only some models, if you have any problem ,contact our Customer Experience Team to verify a safe and proper fitment.

Installation Instructions:
1. Make sure wheel studs are clean and tight. Replace ortighten a problem stud.
2. Ensure the wheel is flat against mounting surface withstuds through each hole.
3. All nuts should be hand started and thensecured in a criss-cross sequence with a torque wrench and socket. Refer to your vehicleowner's manual or wheel manufacturer's guide for propertorque specifications. 12mm Lug size should use 70-80 torque.
4. Check and retighten all nuts after 25 miles of driving andagain after 50 miles, until wheel nut torque remains unchanged.