طقم إصلاح كرسي المكتب لإصلاح كرسي المكتب مع مفتاح ربط سداسي ووسادة مطاطية 304 من الفولاذ المقاوم للصدأ لدعم الكرسي في حالة فشل الأسطوانة

مميزات خاصة

Quality material: This chair sinking stop is made of high-quality 304 stainless steel, strong load-bearing capacity, not easy to break. The accompanying rubber pad increases friction during use and fits tightly into the cylinder to prevent the seat from sinking.
Universal size: Chair sinking fixing tools are suitable for most office chairs with cylinders in the 25-27 mm (0.98-1.06 in) diameter range. After fixing, the chair can be rotated smoothly, extending the service life of the chair.
Unique design: The screws used to fix sinking office chairs can be adjusted for different chairs. At the same time, if the cylinder fails, this office chair clamp can also fix the chair, prevent the chair from sinking, and greatly save the cost of buying a new chair.
Easy to install: This 304 stainless steel office chair saver is very simple to install. Before installation, just adjust the height of the required chair, unscrew the screw, install the clamp on the column, install the screw and tighten it with a wrench, the clamp can be firmly fixed on the column.
Wide range of applications: This sinking office chair repair kit can be used in a wide range of scenarios, you can use it to fix a sunken office chair in the office, or other places that need to be fixed.

وصف

Features:
Suitable for a variety of chairs, can be used in homes, offices,
restaurants, cafes, bars and other places.
The 304 stainless steel office chair saver controls the height of the seat and prevents the chair from continuing to sink after improvement.
After fixing, the office chair can rotate smoothly as before, extending the service life of the chair.
The universal size chair sink fixing tool is suitable for lifting cylinders of most office chairs with an outside diameter of 25-27 mm (0.98-1.06 in).
Specification：
Project: Fix Sinking Office Chair
Material: 304 stainless steel, rubber pad
Color: as shown
Size: Diameter 25-27 mm /0.98-1.06 inches
Packaging includes
1 x chair sinking fixing tool
1 x hex wrench
Matters needing attention：
Due to manual measurement, there may be some errors in size and weight.
Due to differences between different monitors, there may be a slight color difference.

مرحبًا،

بحث

طقم إصلاح كرسي المكتب لإصلاح كرسي المكتب مع مفتاح ربط سداسي ووسادة مطاطية 304 من الفولاذ المقاوم للصدأ لدعم الكرسي في حالة فشل الأسطوانة

مميزات خاصة

وصف

منتجات شبيهه