Material Infor: Rhinestone + Canvas Coverage: Complete diamond
Color as shown in the picture
Steps for making DIY diamonds:
1. Open the package and check the diamond coating tool Particularity.
2. Check the color of resin diamonds and arrange them in the order of coding.
3. Uncover the tape picture above, you will see many symbols corresponding to the color coding.
4. Clamp the corresponding resin inlay according to the corresponding color code.
5. It is recommended that you complete a set of resin diamonds faster.
6. In order to make a perfect diamond painting, it is not necessary to place the graphics of each row of symbols on a specific position on the stuck diamond.
7. In order to cut a good pattern on the pattern, please install the sorted array on the plane of the upper material.
8. The joint must be flat, neat and free of cracks.
9. After a lot of effort, only diamond symbols are left on the glue.
10. In order to complete the high-quality diamond-shaped picture,
-Reminder:
1. Resin diamonds are not edible.
2. The drawing must be kept clean, otherwise it will affect the bonding strength. If dirt adheres, it may be affected by low-temperature solid iron.
3. The diamond remains sticky.
Quantity: 1 set
Reminder: -Two types due to deviation
-The distance between the measurement methods of the product is 1-2 cm, please make sure it suits your situation before ordering.
-Due to the difference between the monitor and the light source, the picture may not accurately reflect the actual color of the product, thank you for your understanding!