EDGE PROTECTION STRIP FOR FURNITURE FOR BABY PROOFING
Color: Pink, Black
Material: Soft rubber foam
Size: 1.3" wide, 0.3" thick, 6.6'' long
Package included: 1 roll 6.5 ft table edge protectors for baby and a roll of strong tape
Installation Instruction:
1.Clean the corners of your furniture and keep it dry
2. Cut the length you need
3. Cut the corresponding length of tape，Peel off the stickers
4. Get the corner guard located, and press tightly for a few seconds
5.Please let baby protectors for furniture stand for 24 hours after Finish
Suitable for various materials
The corner covers baby safety is suitable for clean and smooth surfaces. such as glass, metal,,marble,plastic,wood,tile.
It is not suitable for plaster surfaces, paper surfaces, diatomite, untreated wood, sink tops, and other uneven surfaces.
Attention:
1.Normally,edge protection strip will not damage your furniture. However if your furniture is covered with paper laminate or those that are prone to paint loss, I would not recommend you to install it on this furniture as the adhesive is very sticky and you may damage the furniture.
2.If you want to remove it, do not tear it off directly. Please use a hairdryer or heat gun to soften the tape first (not too hot) and then tear it off slowly to prevent tearing the tabletop or wall. If for some reason, there is still glue residue, we recommend rubbing a few drops of olive or vegetable oil or hot water on it and then wiping with a cloth. This may have to be repeated once or twice. We do not recommend using other solvents.
3.As your baby learn to walk, you will feel worried because they are just the right height to hit those sharp corners. Now, it is time to do something to protect them! The baby protection edge is easy to apply and adds a good cushion to the edges of tables and cabinets for great protection.