Smart Tail Bike Light with Bike Alarm: One bicycle tail light for double use, it's not only a bike taillight but also an anti theft bike alarm. It's build in motion sensor that can easily control the bike brake light on/off and the antitheft alarm work .110dB loud alarm, provide additional security and give you peace of mind when your vehicles park outdoors. 7 levels adjustable vibration sensitivity from gently touch to push or beat, you can easily adjust the sensitivity.
Smart Auto ON/Off Bike Brake Light: Our bicycle tail light build in both gravity sensor and light sensor. If you brake, the rear light will auto highlight for 2s to alert other drivers behind you. On slow flashing and breathing modes, Tail light automatically detects ambient brightness after 30 seconds of illumination, it will light on in dark areal and light off in bright areal. Tail light automatically turns off after 30 seconds of inactivity in dark environments.
4 Modes Bike Tail Lights & Searching Function: Slow Flashing, Breathing, Fast Blinking, Always On, 4 light modes can be easily selected by wireless remote. Super bright COB light source and super wide angle light powerful flashes alert motorists at daytime and night, that enhance your visibility and safety. With the search function, you can click the remote key to find your vehicles in parking lot, this function also can be the bike horn.
Waterproof & USB C Rechargeable: IP64 waterproof, you needn't worry about the rainy days. Our bicycle tail light built in a rechargeable 700mAh lithium battery, about 3h full charge can work up to 48h in always on mode, standby time about 1-3 months according to your work frequency.
2 Installation Ways: Package included mounting bracket and cable ties,so you can choose one of them to install it. Bracket installation suitable for tube installation position. Zip ties installation is suitable for irregular mounting objects. If you have any problems about our products, please contact with us, we can also offer the free return and refund.
Description
How to Install the Bike Taillight and Remote Control? 1. Install the Taillight on the Bike Pipe 2. Install the tail light holder on the seat tube and use a screwdriver to tighten the screw. 3. Insert the taillight into the tail light holder. 4. Install the Taillight under the Bike Saddle 5. Insert the taillight into the mounting bracket, put screws through the hole, and put them under the bike saddle. 6. Install the Remote Control on the Handlebar 7. Use the rubber band to fix the remote control on the handlebar How to turn off this Ambient Light Detection function if you don't need it? Method 1: Please cover the sensor at the bottom of the bike taillight with black tape. Method 2: Please long-press the power button on the taillight for 3s when charging till a group of LED lights in the middle of the taillight flashes. After repeating the step, this function will be turned on again.
-19%
Wildroad Hitch Cargo Carrier with Bike Rack 60" x 24" x 14" Folding Trailer Hitch Cargo Carrier 500 LBS Capacity for Standard, Fat Tire and Electric Bike Fits 2" Receiver
SAR 1,148
Ebike LCD Display Control Unit Replacement 500C P850C 860C 750C-ble DPC18 Backup 5 Pin Female Plug for Bafang BBS01 BBS02 BBSHD Motor Kit(Com.Protocol UART)
SAR 348
Himiway Bike Foldable Cargo/Kids/Pets Trailers, Load Capacity 88 lbs, Foldable Frame+20-Inch Tires
SAR 746
WSLHFEO Liquid Performance Racing Premium Cycle Wash - 1 Gallon 0010.
SAR 144
