BS-708 G-Mouse USB GPS Dongle Navigation Module G7020-KT Chip External GPS Antenna with 4M Flash USB GPS Receiver for Raspberry Pi Linux Windows 7 8 10
All electronics ship with US style plugs.You may need a voltage converter or a plug adapter.
Special Features
BS-708 USB GPS Module support windows and linux system, not for android and IOS system
BS-708's chip is G7020-KT. The Receiving Format: GPS,QZSS and SBAS, and have 56 Searching Channel; Data Level: Default USB level; Data Protocol: USB, TTL or RS232, Default NMEA-0183
You need to install the driver to use BS-708 USB GPS Module on Windows system, but it is plug and play on Linux system
This usb GPS receiver has a cable length of 2 meters, BS-708 USB GPS Module has 4M flash to save the configuration. So you don't need to reset the data when you use it next time
The product documentation link cannot be displayed. If you need technical documentation, please click “Geekstory”(you can find "Sold by Geekstory" under Buy Now button), in the new page, click “Ask a question”
Documentation you can find at the bottom of the details page - Product guides and documents: (User Manual (PDF), which contains details on how to use and links to the drivers.
Description
Feature:
Chipset: G7020-KT
Receiving Format: GPS, QZSS and SBAS
Frequency: GPS L1, SBAS L1
Channels: 56 Searching Channel
Tracking: -162dBm
Reacquisition: -160dBm
Cold start: -148dBm
Position Horizontal: 2.0 m CEP 2D RMS SBAS Enable (Typical Open Sky)
Velocity: 0.1m/sec 95% (SA off)
Timing: 1us synchronized to GPS time
Cold Start: 29S
Warm Start: 25S
Hot Start: 1S
Support Rate: 4800bps to 921600bps,Default 9600bps
Data Level: Default USB level
Data Protocol: USB, TTL or RS232, Default NMEA-0183
Concurrent GNSS: 1Hz-10Hz,Default 1Hz
Altitude: 50,000m Max
Velocity: 515m/s Max
Acceleration: Less than 4g
VCC: DC Voltage 3.6V-5.5V, Typical: 5.0V
Current: Capture [email protected]
Dimension: ΦO=56mm*18mm
Connector: USB 2.0 interface
Cable Length: 2.0m
Operating temp: -40 °C ~ +85°C
Storage Temp: -40°C ~ +105°C