Indusco hot dipped galvanized drop forged regular eyebolts furnished with standard hex nuts. Rated capacity is drastically reduced when loading at any angle. Loading must never be made at an angle greater than 45 degree from bolt centerline. At any angle of 45 degree, rated capacity is reduced to 1/4 of the tabulated value. Loads should always be applied to lifting eyes in the plane of the eye, not at some angle to this plane. Ultimate load is five times the working load limit. 5200 pounds working load limit. 5-inches thread length. Shank measures 3/4-inches diameter by 15-inches length.