About the product:
convert AC to DC, output current depends on the requirements of the power equipment, can supply power to multiple devices with different currents/watts.Great for LED Strips, 3D Printers, Computer Lab,CCTV cameras, wireless routers, HUB, Car Stereo and 3D Printer.
Good choice for you:
1.LED driver power supply built-in over-voltage, overload, overheating and short-circuit protection function, the shell is rugged and durable, for you and your equipment to provide good protection.
2.AC to DC converter, aluminum alloy housing, built-in cooling fan and temperature detector. The cooling fan will run automatically when the running power is high with low noise.
3.The switching converter have synchronous rectification intelligent chip and EMI filter, effectively reduce electromagnetic interference.
Specification:
Input: AC 100V/220V 50/60Hz
Output Voltage : DC 24V
Output Current: 33.3A
Output Power: 800W
Fix Screw Hole Diameter: 2.5mm (0.01inch)
Working temperature: -20℃ ~50℃
Storage temperature: -20℃ ~ 85℃
Environmental humidity: 10-95%
1 pcs x Switch Power Supply

Easy to install:
Easy to operate The power supply does not need to be installed, and the output can be adjusted after wiring, easy to use.
Tips:
1. Please select the input voltage 110V/220V according to the local voltage before use to avoid damage..
2.This parameter must not be higher than the maximum current of the power supply. Otherwise the power supply may be damaged.
3.The maximum current is 33.3 A. However, the actual current depends on the load.