مميزات خاصة

Connect Accumulator Tank to outlet side of water pump for best results
Accumulator tanks hold a reservoir of air and water down stream from the pump
Longer pump life, lower battery drain,reducing noise and providing a more consistent water supply.
Internal rubber membrane eliminates maintenance and simply fitted to new or existing systems
Accumulators allow the pump to reach shut-off pressure more smoothly which reduces the on/off cycle which gives better control of hot water delivery

وصف

★Parameter

Inlet/Outlet Dia:1/2" MNPT

Volume:0.75 Liter(25 FL OZ)

Water psi:Max 125 PSI (8.6 BAR)

Pre-charge pressure:10 PSI(0.87 BAR)

Air Fill Vale:standard automotive style tire valve

Applications:Boat,Marine, RV,Caravan,ect

★Please Note

1.Relieve air psi prior to disassembly

2.Do not use to pump flammable fluids,gasoline,kerosene fuel oil

3.Do not use pump in a explosive environment or use where flammable vapors are present

4.Petrol or fluids with flash point below 37°C(98°F), explosion or death may occur.

5.The accumulator tank comes pre-pressurized at 10 PSI. For optimal usage, please set accumulator tank to ~3 PSI below your water pump's cut-in pressure and make sure it is connected to the outlet of the pump

6.Do not over pressurize tank. Pressures over 125PSI(8.6BAR) may rupture tank and cause personal injury.

مرحبًا،

بحث

مميزات خاصة

وصف

منتجات شبيهه