How to Use:
1. Connect the BEC line to the receiver
2. Connect the motor lead to the ESC
3. Turn on the transmitter
4. Connect the battery pack to the ESC, and then turn on the ESC.
5. After the connection between the motor and the battery is completed, the motor will emit a "beep" sound.
6. When the throttle stick is in the neutral position, the electric motor will re‑beep.
7. ESC is feasible.
Specification:
Item Type: Brushless ESC
Material: Aluminum Alloy + Copper + Plastic
Weight: Approx. 256g / 9oz
Motor Parameters:
Wattage: 900W
Maximum Voltage: Maximum Amperage: 41A
KV Value (RPM/Volt): 2300KV
Maximum Speed: 50000
Diameter: Approx. 36mm / 1.4in
Length: Approx. 50mm / 2in
Shaft Length: Approx. 15mm / 0.6in
Shaft Diameter: Approx. 3.175mm / 0.1in
Plug Type: 4mm / 0.2in Golden Banana Plug
ESC Parameters:
Continuous Current: 120A
Burst Current: 600A / 10sec
Product Applicable Battery: 2-3s Lithium Battery / 4-12s Ni-MH Battery (Not Included)
BEC Output: 5.3V / 5A (Switch Mode)
Power Plug: T Male
Motor Plug: 5mm / 0.2in Female Connector
Application: 1/8 1/10 RC Remote Control
Package List:
1 x ESC
1 x Motor
1 x Manual
Note:
1. Avoid working temperature exceeding 65°C (150°F).
2. Do not touch the motor after use, because the motor may overheat.
3. Allow the motor to cool completely between uses.
4. Make sure to use the correct size motor mounting screws.
5. Do not over tighten the motor mounting screws.