All electronics ship with US style plugs.You may need a voltage converter or a plug adapter.
Special Features
20 Degree 0.1mm Carbide Engraving Bits
Router Tool For PCB Board
Razor blades permanently enclosed in a cartridge or housing with less than 2mm of blade exposed. The bladed product is not use for people under 18 years. The item is only use for industrial /engraving, not hazardous article.
The shank diameter is about 3.175mm, which can be installed on the rotating tool when combined with 1/8 "collet
It is made of hard alloy, with high hardness, good heat resistance and not easy to wear.Even after continuous use for a long time, there will be no obvious signs of wear, and even the tip still feels very sharp.
It can be used to carve precise details, such as using these to carve copper-plated PVC board, which can remove fine lines on the surface of glass fiber printed circuit board and deal copper,engraving soft wood
Suggestion: The feed speed and spindle speed when processing PCB prototypes should start from low speed
Paw Print Template,Router Template,Clear Acrylic Template,Acrylic Router Template (7.5" x 7.5")
SAR 94
findmall 7Pcs ER20 Spring Collet Set 1/8-1/2 for CNC Milling Lathe Tool Workholding Engraving Machine
SAR 74
2PCS CNC Engraving Bit Router Converter Set - 1/2" to 1/4" Collet Adapter for Engraving Machine Tool, CNC Router, and Driver
SAR 65
10Pcs TiCN Coated Groove V Bit, 1/8" Shank CNC Router Bit End Mill Cutter| 20/30/45/60/90 Degrees, 0.1mm Tip
SAR 105
