SparkFun Pro Mini ATmega328-3.3V/8MHz Development Board | SparkFun's minimal design approach to Arduino. This is a 3.3V Arduino running the 8MHz bootloader.
All electronics ship with US style plugs.
You may need a voltage converter or a plug adapter.
Special Features
ATmega328 running at 8MHz with external resonator (0.5% tolerance)
No USB connection on board. Need FTDI or serial board (or similar device) to program.
Supports auto-reset Has On board Power and Status LEDs
3.3V regulator Max 150mA output
Requires soldering to use. Choose your prefered connectors, solder, and go!
{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}
{"email":"Please enter your email address","email_i":"Invalid email address"}
Copyright © Tilga 2026, all rights reserved.
SparkFun GPS-RTK Board - NEO-M8P-2 (Qwiic) High-Accuracy breakout No Soldering Required Breadboardable Contains a Rechargeable backup battery allowing a Warm-start decreasing time-to-first-fix
SAR 1,146
SparkFun Teensy 4.1 ARM Cortex-M7 Processor at 600MHz with a NXP iMXRT1062 chip
SAR 171
SparkFun OpenLog Open-source data logger works over a simple serial connection Supports microSD FAT16/32 cards up to 32GB Configurable baud rates up to 115200bps Preprogrammed ATmega328 and bootloader
SAR 92
SparkFun FTDI Basic Breakout - 3.3V Development Tool with USB Mini-B Connector Save Space and Money in Your DIY Electronics Projects Pinout of This Board Matches The FTDI Cable
SAR 97
Saudi Arabia
