EK-Loop Hard Tube 16mm 0.8m Pre-Bent 90 degree - Acrylic (6pcs) is a 6-pack of 12/16mm (ID/OD) acrylic tubing bent to a 90-degree angle with a tubing length of 250mm and 550mm on either side of the bend. Intended to help liquid cooling beginners, but also bring a quality of life improvement for liquid cooling enthusiasts by shortening the time and effort needed to bend the tubing and build the systems. It comes in a length of 0.8m (800mm) which can be easily cut and shortened to an adequate length for any tubing run. It is mandatory to chamfer the edges of a freshly cut tube in order to prevent gasket (O-ring) damage. Technical data: - Material: Extruded acrylic - Inner diameter: 12 mm - Outer diameter: 16 mm - Total length: 800 mm - Bend Angle: 90 degree - Bend Radius: R30 - Length per axis: 550 x 250mm Model: 3831109826065