These unicorn patches are applicable to clothing decoration, bag decoration, hat logo, craft project, scrapbooks andother DIY activities. In addition, they are also favored with many oradults
Material:
These unicorn patches made from exquisite towel embroidery and non-woven fabrics which are serviceable and washable.
Method:
1.There is hot melt adhesive on the back of the Bow patch which can be heated directly with iron,150 degrees(302F)30seconds.usually more longer time more tight according your materials ofclothes.
2.Directly use double side tape for short time using.
3 you can also reinforce the heart patches with needle and thread,which one wayis best according to your cloth and need.
Notes:
1. Please allow slight size error due to manual measurement.
2. When the temperature is heated to about150 degrees, you can start your job
3.If the temperature is low, it will be stuck at the beginning, but it will fall after a while
4. Press the iron down for 20-40 seconds, don't move back and forth at this time
5. In order to prevent burns, it is recommended to put a thin cotton cloth on the cloth.
6. Check if the edges are hot after ironing, on the edge Iron a few more times.
7. If you are worried that the unicorn patches will fall, use a needle to sew a few stitches on the edge of the wing.

