1960KV FOR 6S 5-INCH BUILDS - Manufacturer-rated 1.85 kg max thrust and 940 W peak per motor on 6S with 5-inch tri-blade props. The 12N14P layout is where the torque for punch-outs, power loops and gate recovery comes from.
PUBLISHED ELECTRICAL SPECS - 55.5 mOhm internal resistance and 1.0 A no-load current at 10 V on the 1960KV winding, listed so you can check the motor against your ESC, prop pitch and battery before you solder.
FITS STANDARD 5-INCH FRAMES - 16 x 16 mm M3 motor mount and M5 prop nut thread, the common footprint on 5-inch freestyle and racing frames. Match your arm hole spacing and prop hub bore before ordering.
ONE-PIECE MACHINED BELL - The bell is a single piece instead of a pressed assembly, which keeps balance runout low and reduces the vibration that can blur FPV footage.
FOUR MOTORS, ONE COMPLETE QUAD - Four 1960KV motors and mounting hardware in one box, enough for a full 5-inch build or one spare set. 1960KV is the 6S winding, so check your battery cell count first.