GREEN GLOW GUN SIGHT PAINT — Designed for front and rear sight touch-ups, this photoluminescent paint helps create controlled 1–3 mm markings. Pale yellow in normal light, it produces a visible green afterglow after proper charging. Also suitable for models, crafts, repairs, and other precision detail work.
1 MM PRECISION TIP — Small sight work takes patience. Clean and dry the surface first, shake thoroughly, then practice several dots on the included black test card to learn squeeze pressure before applying to the actual sight. The approx. 1 mm needle tip gives better control for millimeter-scale application.
CHARGE FOR BEST GLOW — Photoluminescent paint must absorb light before it can glow in darkness. Use strong sunlight, UV/purple light, or another strong light source and give the coating enough exposure time. If glow seems weak, recharge under stronger light and also check coating thickness and surface color before judging the result.
SHAKE, CLEAN, CAP — Re-disperse the coating by shaking before each use. After application, gently clear the nozzle with the included 0.5 × 80mm flexible cleaning wire, wipe the tip if needed, and recap promptly. Regular nozzle care helps prevent dried paint at the opening from blocking future 1–3 mm dot applications.
TESTED PERFORMANCE — Supplier laboratory reference data: approx. 0.5 h surface dry, 941.6 mcd/m² after 10 min, 131.1 mcd/m² after 1 h, afterglow up to 14 h, and Grade 1 adhesion. Results were measured under specified test conditions including a white base, UV/purple-light excitation, and approx. ≥1 mm coating thickness; actual use may vary.