Spec:
Item Type: Hydrogen Tester
Model: FH-77
Material: ABS
Battery: 2 x 1.5V AAA (battery not included)
Uses: Aquariums, aquaculture, soilless culture, swimming pools and hot springs, school laboratories, chemical, food or beverage manufacturing, textile printing and dyeing, paper or pulp bleaching, printing, cooling towers, boilers, cleaning or sewage treatment, etc.
Range ppb 0~1999ppb
ppm 0~1.99ppm
Resolution ppb 1ppb
ppm 0.01ppm
Accuracy ppb ±10ppb
ppm ±0.02ppm
Automatic Temperature Compensation 0℃~50℃
Working Temperature 0℃~50℃
How to Use:
1. Remove the protective cover, rinse the electrode with distilled water or clean water, and wipe off the water on the electrode and the plastic parts around the electrode with filter paper after cleaning (do not touch the electrode with your hands)
2. Turn on the instrument, hold the instrument, and suspend the electrode in the test solution
3. Gently agitate the instrument to ensure that there are no bubbles attached to the electrodes, which will affect the accuracy of the detection;
4. Left click to switch the unit of hydrogen rich reading, you can switch back and forth between ppb and ppm;
5. Right click to switch the unit of temperature reading, you can switch between Celsius and Fahrenheit.
6. Read the value.
7. Take out the instrument, rinse the electrode with distilled water or clean water, wipe off the water on the electrode and the plastic parts around the electrode with filter paper after cleaning (do not touch the electrode with your hands).
8. Complete the test and shut down. Store the instrument in a dry box.
packing list:
1 x Hydrogen Tester(battery not included)
1 x Manual
Notice:
1. When the voltage is too low, a low voltage prompt will appear.
2. When the range is exceeded, the reading will display "1".
3. When the measurement reading is inaccurate, lightly brush the metal surface of the electrode with a soft brush.
4. When the electrode is dirty, 75% or 95% alcohol can be used to clean the electrode.
5. The electrode head must be kept clean and intact, so as not to affect the measurement results of the instrument.
6. When the instrument is not used for a long time, the dry battery in the instrument should be taken out.
7. The instrument has been calibrated before leaving the factory and can be used directly.
8. After each use, please wash the electrode with distilled water or clean water, and dry the electrode with filter paper.
9. Cleanliness is very important to the accuracy and service life of the electrode.
10. Do not touch the electrode part with your hands. The electrode should be suspended in the solution during measurement, and the electrode should not be in contact with the wall of the cup.
11. Do not remove the electrode parts by yourself or repeatedly plug and unplug the electrode parts if it is not necessary.
12. Do not drop accuracy instruments.
13. Please place the instrument out of of children.