Get Your Ride-On Car Moving Again—or Build a Faster 12V SetupWhen a kids' ride-on car loses drive on one side or its original motor gearbox has worn out, replacing the drive assembly can get the vehicle back in use—provided the gearbox is the source of the problem. If the original motors are lower RPM and you are planning a speed-focused modification, this pair of 12V RS550 40000RPM motor gearboxes also gives you a higher-speed motor setup.
The 40000RPM specification describes the speed of each motor, not the speed of the vehicle. How the car drives after installation depends on its battery, controller, gearing, wheel size, load and original configuration.
Update Both Drive Sides with One 2-PackThis ALVOTREX set includes 2 motor gearboxes and 2 wiring harnesses. It lets you replace the left and right drive assemblies in the same job, whether you are repairing confirmed gearbox failures or upgrading a compatible 12V ride-on car. Each harness provides a convenient motor connection; when its connectors match the original wiring and terminals, installation does not require soldering.
Package contents: 2 × 12V RS550 40000RPM motor gearboxes and 2 × wiring harnesses. Drive couplers are not included.
Compare Your Original Gearbox Before OrderingRide-on cars can use different gearbox housings and wheel connections even when their motors have similar 550, 550-C or RS550 markings. To check fit, compare the original assembly with the product photos. Pay particular attention to the 0.47-inch (12mm) shaft opening, housing shape, mounting points, wheel connection, motor position and available space inside the vehicle.
Also confirm that your vehicle uses a 12V electrical system. Compare the original plug, motor terminals and wiring direction with the included harnesses. This gearbox pair is not a universal fit or a direct replacement for 24V systems and other motor types.
Check the Cause Before Replacing the MotorsIf the car will not move, a failed motor gearbox is only one possible cause. Check the battery charge and condition, fuse, connectors and wiring before replacing parts. Once you have confirmed the original gearbox needs replacement and the specifications match, this 2-pack gives you the parts for both drive sides in one order.