Furitek TRI-UNITY30 FullRange Drive with Aluminum Skid Next-Gen FOC Drivetrain for Axial SCX30
Ultra Slow. Full Speed. One Drivetrain. The TRI-UNITY30 FullRange Drive brings a new drivetrain architecture to the Axial SCX30, combining a brushless motor, conventional geared transmission and advanced Furitek FOC ESC in one ultra-compact assembly. Replacing the traditional center worm-based transmission approach opens up a much wider usable speed range. Furitek FOC control delivers ultra-slow crawling precision, while the geared layout allows significantly higher wheel speed when the terrain calls for it.
Skid Plate Required
TRI-UNITY30 cannot be installed or used with the stock Axial SCX30 skid plate. The required FUR-2843 Aluminum Skid Plate is included.
FullRange Drive
Brushless motor, conventional geared transmission, Furitek FOC ESC, built-in WiFi and Furicar App wireless tuning. The geared transmission allows significantly higher wheel speed while Furitek FOC provides precise ultra-low-speed control, giving the Axial SCX30 a more realistic response to throttle input.
3-in-1 Integration
Motor, transmission and FOC ESC form one ultra-compact assembly with the ESC integrated into the transmission package. Electronics sit lower in the chassis, removing the need for a separate ESC mounting position and leaving more room for battery placement and chassis layout. The final vehicle balance depends on the complete build, including the battery, chassis, wheels and axles.
Front or Rear Weight Bias
Motor and ESC sit on the same side of the drivetrain assembly, so their mass can be placed toward the front or rear by choosing the drivetrain orientation supported by the chassis and skid setup. A forward orientation can help keep the front axle loaded during climbing. A rearward orientation gives another option for balancing the vehicle around battery placement, terrain and driving preference.
Wireless Setup
A built-in WiFi module connects to the Furicar App for supported ESC adjustments, with no separate programming module.
Furitek FOC
Field-Oriented Control manages the brushless motor's torque-producing current for smooth, precise operation. The transmission still provides mechanical reduction and torque multiplication, while FOC adds the fine control needed at very low speeds and preserves access to the wider speed range as throttle input increases.
Compatibility and Installation
Target platform: Axial SCX30, 1/30 scale
Stock Axial SCX30 skid is not compatible
When installing in the stock Axial SCX30 frame, minor trimming of the center frame area is required for proper clearance. For direct installation without frame trimming, use the FUR-2783 FURITEK MANTIS LCG Competition Chassis Kit for SCX30, available separately.
Compatibility with third-party and aftermarket frames has not yet been verified.
Front-facing or rear-facing installation depends on skid mounting, chassis clearance and driveshaft fitment.
Fitment with the stock Axial SCX30 transmission or other drivetrain systems is not confirmed.
Specifications
Platform: Axial SCX30, 1/30 scale
System: Integrated brushless motor, transmission, FOC ESC
Center Transmission: Conventional geared architecture
Motor Control: Furitek FOC with FullRange Drive
Wireless Tuning: Built-in WiFi + Furicar App
Battery Support: 2S-3S LiPo
BEC Output: 5.5V / 7.4V selectable, 5A
Housing Material: CNC-machined aluminum
Power Connector: 2-pin JST-PH 2.0
Skid Included: Yes (FUR-2843)
Package Includes
1x FURITEK TRI-UNITY30 FULLRANGE DRIVE assembly (integrated brushless motor, conventional geared transmission, Furitek FOC ESC, built-in WiFi module)
1x FUR-2843 FURITEK Aluminum Skid Plate for TRI-UNITY30 SCX30
1x User Manual
Required Equipment (not included)
Compatible transmitter and receiver system
Compatible 2S-3S LiPo battery with a 2-pin JST-PH 2.0 connector or suitable power adapter
Mobile device with the Furicar App for wireless tuning