EasyShoe 3D by Easycare Inc.Composite glue-on horseshoeDesigned for track and arena sportsFrog supportFinger tabs for easy gluingAvailable in front and hind patternsSizes 118F-134F for the front and 110H-126H for the hindSold in pairsPet supply for horse hoof careBe sure to measure your horses hoof at the widest pointsSB-ES3D-FThe EasyShoe 3D is a composite glue-on horseshoe designed for track and arena sports. The EasyShoe 3D is integrated with frog support by 3D HoofCare and finger tabs for easy gluing. Simply stand the horse in the horseshoe and apply the tabs using Super Glue. No welding required. Available in both front and hind patterns, sizes 118F-134F and 110H-126H.Sold in pairs.Tips and Facts:Application - EasyShoe Quick Set Super Glue, sold separatelyThe EasyShoe 3D comes in sizes that correspond to the widest part of the horse's hoof. Each shoe is 4mm different in size. Measure a horse's hoof at the widest pointThe EasyShoe 3D can stay on for a full trim cycle approximately 4 to 6 weeksIt is typical to get 1-2 resets per pairTo apply the EasyShoe 3D, you will need EasyShoe Quick Set Super Glue and Plastic Wrap. Additional tools may be needed for hoof preparation including a rasp, hoof buffy, butane torch, etc. These are not included and may be need which you can purchase separately on your ownBreakovers - It's easy to rasp or grind away material for a custom breakover