Introduction
RP2350-USB-A is a mini RP2350 development board with a USB expansion port that is compatible with USB 2.0/1.1 transmission. Under the extremely small
board size, 15 multifunctional GPIO pins are led out, and the PCB edge adopts half hole technology, which can be easily and quickly integrated into
the project.

Features
RP2350 microcontroller chip officially designed by Raspberry Pi
Adopts unique dual-core and dual-architecture design, equipped with dual-core ARM Cortex-M33 processor and dual-core Hazard3 RISC-V core processor, flexible clock running up to 150 MHz
Built-in 520KB of SRAM and 2MB of on-chip Flash
Onboard 1 USB port, compatible with USB2.0/1.1 transmission
Castellated module allows soldering directly to carrier boards
Drag-and-drop programming using mass storage over USB
15 × multi-function GPIO pins of RP2350
Multiple hardware peripheralsSPI × 2
I2C × 2
UART × 2
12-bit ADC × 4
Controllable PWM channel × 14
Built-in temperature sensor on chip
12 × Programmable I/O (PIO) state machines for custom peripheral support

Package Content
RP2350-USB-A x1